2D Drawing
Used in the transfer of water, brine, water-based chemicals, water-based acids, and gelatinous proppant (sand) slurry used at hydraulic fracturing sites
MX | en
Image
Have a Question?
Call +8183545649 or click the Contact Us Button to send us an email.
Attributes
| Weight |
0 lb
|
|---|---|
| Break Quantity |
0
|
| Optional Package/Box Quantity |
0
|
| Material |
Iron
|
| Component Material |
Nitrile Rubber
|
| Inlet |
6"
|
Details
Application
Available Options
Side ports can be configured with forged NPT plugs or adapters with caps. Contact Dixon for options.
Construction
- Iron meeting ASTM standards
- 5 Nitrile rubber O-rings (part #O439BU)
Features
- Manifold designed for efficient fluid flow, reduced turbulence, and reduction of pump cavitation caused by sand fallout
- Single cast unit with no welds to deteriorate causing premature leakage/failure
- Rear ports designed for inspection and instrumentation
- Reduced height for ease of installation
- Manifold allows for clean-out ports on either side, both sides, or with no clean-outs
- Forklift pockets for easy installation
- Slotted bolt holes accommodate standard 6.5" x 6.5" bolt hole pattern
- Configured with 6" male NPT with side ports drilled on the right side
- 6" grooved manifold with six 2" female NT ports, one 1" NPT port (left or right version)
- 6" male/female hammer union manifold with six 2" female NPT ports, one 1" NPT port (left or right version)
- O-rings included with all configurations
Note
Contact Dixon for additional information and configurations
