Designed for use with liquids, consult Dixon for specific recommendations

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Final weld preparation, as with all weld fittings, is the responsibility of the welder.
• Line drawings are for reference only. Consult Dixon for specific dimensions.
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard Nitrile Rubber seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

No standard exists for the 5" fittings, and generally does not interchange with other manufacturers.