Catalog Page
- Chemical, pulp and paper, oil and gas refineries, military, air compressors and machine tools
- Well-suited for a variety of processing and general industry hydraulic applications
MX | en
Image
Have a Question?
Call +8183545649 or click the Contact Us Button to send us an email.
Attributes
| Tube OD |
1/4"
|
|---|---|
| Weight |
0.031 lb
|
| Break Quantity |
0
|
| Optional Package/Box Quantity |
0
|
| Material |
Steel
|
| Male Thread |
37° JIC
|
| Male Thread Size |
1/4"
|
Details
Applications
Features
- 3 piece design including only one ferrule eliminates possible make-up errors that may occur using a twin ferrule tube fitting.
- Minimal risk of improper assembly as the ferrule visibly bites into the tubing which allows installer to visually inspect the bite quality.
Installation
- Cut, de-burr and clean tubing
- Pre-set ferrule onto tubing
- Inspect ferrule bite in tubing by disassembling the fitting and visually inspecting the de-burred end of the tube for slight indentation.
- Finger tighten nut and then further wrench tighten nut another 1/3" to 1/2" turn.
Note
- Temperature rating is limited by the material chosen
- Pressure ratings are determined by the size (OD) and wall thickness (inches/mm) of the tubing on which they are to be installed
Specifications
Exceeds Military (MIL F18866) and SAE J514 standards
Use
- Ideally suited for use with tubing having medium to extra heavy wall thicknesses.
- Fittings are suitable for sub-zero through elevated temperature applications
