J-Series Automotive Pneumatic Standard Hose Barb Coupler

Attributes

Weight	0.18 lb
Break Quantity	0
Optional Package/Box Quantity	0
Material	Brass
Maximum OD	0.88" (22.4 mm)
Body Size	1/4"
Temperature Range	-40°F to 250°F (-40°C to 121°C)
Length	2.53" (64.3 mm)
Hose ID	1/4"
Hex	3/4"
Pressure Rating	See Product Details

Details

Machined components are manufactured using solid bar stock.
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
Nitrile (Nitrile Rubber) seals are standard
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Steel sleeve and steel tubular valve

Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 10,500 PSI (724 bar) Burst
Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 11,500 PSI (793 bar) Burst

Resources

Learning Video

2JS2-B - J-Series Automotive Pneumatic Standard Hose Barb Coupler