MX flag MX | en
MX flag MX | en

2710604C - NPTF Male Swivel x Push-on Hose Barb

View Similar Products
Have a Question? 

Call +8183545649 or click the Contact Us Button to send us an email.

Contact Us

Attributes

Weight
0.07 lb
Break Quantity
1
Optional Package/Box Quantity
1
Material
Brass
Component Material
Yellow Plastic Cap
Male Thread
NPTF
Length
2.15"
Hose ID
3/8"
Hex
9/16"
Male Thread Size
1/4"-18
Temperature Rating
-40°F to 150°F
Pressure Rating
120 PSI

Details

Construction

  • Dryseal
  • Two piece crimped fitting with O-ring swivel

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

  • No hose clamps or ferrules are needed
  • Swivel is for assembly convenience only, not for live swivel applications

Safety Notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

  • Number of Barbs: 2
  • Barb Length: .90"

Resources

Related Products

Female NPTF x Push-on Hose Barb

Male NPTF x Push-on Hose Barb 90° Elbow

hose fitting installation tool 272at

Push-On Fitting Insertion Tool

Hose Assembly Tool

Request a Quote

Need help selecting the correct components?

Request A Quote Today

Request a Quote