2D Drawing
- Zinc plated steel 3500 nipple
- Carbon steel ferrule
MX | en
Have a Question?
Call +8183545649 or click the Contact Us Button to send us an email.
Attributes
| Weight |
0.99 lb
|
|---|---|
| Break Quantity |
0
|
| Optional Package/Box Quantity |
0
|
| Material |
Steel
|
| Male Thread |
NPT
|
| Hose OD To |
1-34/64"
|
| Hose OD From |
1-30/64"
|
| Hose Size |
1"
|
| Male Thread Size |
1"
|
| Pressure Rating |
Details
Construction
Features
- Low profile
- Streamline appearance
Installation
Can be crimped or swaged-on to achieve maximum coupling sealing and retention
Note
For crimp or swage recommendations, contact Dixon.
Safety Notes
- For air and water service only
- To provide protection against coupling breakage and related hazards, Dixon® recommends the use of a whip hose.
Use
- The constant vibration created by air tools, like air drills and pavement breakers, is destructive to air hose couplings, especially the quick-acting type. To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose.
- To construct a whip hose, connect one end of a short (3' to 10') air hose to the air tool using a 3500 type steel nipple. Connect the other end of the hose to the air supply using the standard quick-acting coupling. The heat treated 3500 nipple will withstand vibration far better than the standard coupling and provide a safer connection. The whip hose should remain permanently connected to the tool.
Resources
Catalog Page
