U-Series Universal Pneumatic Female Threaded Coupler

Attributes

Maximum Operating Pressure	300 PSI (20 bar)
Weight	0.23 lb
Break Quantity	1
Optional Package/Box Quantity	1
Material	Brass
Maximum OD	0.92"
Thread	NPT
Body Size	1/4"
Temperature Range	-40°F to 250°F (-40°C to 121°C)
Thread Size	1/4"
Length	2.32"
Hex	3/4"

Details

2U-Series 6-in-1 (ARO 210, Industrial, Truflate, Lincoln, Italian, and CEJN 320)
Parker UC-Series, Hansen Auto-Flo 23 and Coilhose Series UC

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
Note: Many competitive Universal couplings are unable to match the performance capabilities of the Dixon U-Series. Although the universal coupler permits multiple series nipples to mate with one coupler, it is recommended to match like series couplers and nipples. When using a universal coupler, the lower performance rating between the coupler and the nipple must take precedence.
Dry Air: Some pneumatic applications require the pressurized air to be 'dried' to ensure proper operation of equipment and/or application of product (ie. Auto body shops). It is best to match like series couplers and nipples in these applications. If it is necessary to use a Universal coupler, lube the seal and valve area regularly to ensure reliable service.

Resources

Learning Video

Learning Video

Catalog Page

2UF2-B - U-Series Universal Pneumatic Female Threaded Coupler