MX flag MX | es
MX flag MX | es

2890609C - Female 37° JIC/45° SAE Swivel x 90° Push-on Elbow

Ver productos similares
¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Contáctenos

Atributos

DE de Tubo
3/8"
Peso
0.1 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Plated Steel
Material de Componentes
Yellow Plastic Cap
Rosca Hembra
UNF
Rango de Temperatura
-40°F to 150°F (-40°C to 65.6°C)
DI de Manguera
3/8"
Valor de Presión
350 PSI
Tamaño de Rosca Hembra
9/16"-18

Detalles

Features

JIC only

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

  • No hose clamps or ferrules are needed
  • Part is JIC only, may substitute dual angle. Contact Dixon.

Safety Notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

  • Number of Barbs: 2
  • Length Centerline C: 1.85"
  • Length Centerline D: .91"

Recursos