Imagen
3/8"
MX | es
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Presión de Operación Máxima | |
|---|---|
| Peso |
0.35 lb
|
| Break Quantity |
0
|
| Paquete Opcional/Cantidad por Caja |
0
|
| Material |
316 Stainless Steel
|
| DE Máximo |
1.18" (30.0 mm)
|
| Rosca |
Female NPTF
|
| Sello de Presión |
EPDM
|
| Tamaño de Cuerpo |
|
| Presión de Trabajo |
4,000 PSI (275 bar)
|
| Rango de Temperatura |
-65°F to 300°F (-54°C to 149°C)
|
| Presión de Reventón |
8,000 PSI (550 bar)
|
| Medida de Rosca |
3/8"-18
|
| Longitud |
1.94" (49.3 mm)
|
| Hex |
1"
|
| Temperatura Máxima |
300°F (149°C)
|
| Flujo |
9.5 GPM at Delta P = 22 PSI
|
| Valor de Presión |
Detalles
Available Options
- Contact Dixon for all available option adders
- Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone
- Kalrez® seal options include: 4079, 6375 and 7075
- Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel
- Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged
- Oxy-clean treatment is available
Compatibility & Interchange Data
- Interchangeable to MIL-C-51234
- Interchangeable with Snap-Tite H/IH Series and Faster TNV
Construction
- Machined components are manufactured using solid bar stock
- Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
- Steel coupler sleeves are hardened to resist deformation and maximize service life.
- Tubular 'TV' valves are constructed from steel bar stock and are designed for optimum performance in pneumatic applications.
- Nitrile (Nitrile Rubber) seals are standard
- All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage.
- Valve seals are crimped in place to maintain integrity during excessive flow conditions and pressurized connection.
- Ball Bearings: 6
Features
General purpose hydraulic quick-connect provides superior flow characteristics for a variety of applications
Note
Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation.
