Imagen

13MHHV1000 - Abrazadera Apernada Sencilla para Tubería Cédula 5s y 10S

¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Atributos

Peso
3.71 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Acero inoxidable 304
Medida de Tubería
NEMA 4/4X enclosure"

Detalles

Note

  • Wing nut tightened to 25 in. lbs. torque
  • Please note in sizes 1/2" through 12" pipe is known by its nominal inside diameter, which differs from its actual inside diameter. To distinguish pipe sizes from actual measured diameters as used for tube, the terms iron pipe size (IPS) or nominal pipe size (NPS) are usually used. For all pipe sizes, the outside diameter (OD) remains constant; the variations in wall thickness affect the inside diameter (ID).
  • 304SS ships as 13MHHM100-150

Safety notes

  • Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to required torques. Tests are done hydostatically with no water hammer or shock loads.
  • All ratings shown are dependent upon related components within the system and proper installation.