Imagen
Product Literature
MX | es
Imagen
4PM4-FS - Acoplador con Rosca Macho Manga con Brida Moleteada Intercambio Thor Dual-Lock®
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Presión de Operación Máxima | |
|---|---|
| Peso |
0.58 lb
|
| Break Quantity |
0
|
| Paquete Opcional/Cantidad por Caja |
25
|
| Material |
Acero
|
| Rosca |
NPTF
|
| Tamaño de Cuerpo |
|
| Rango de Temperatura |
6" grooved manifold with six 2" female NT ports, one 1" NPT port (left or right version)°F (Not pressure retaining, open flow only°C)
|
| Presión de Reventón |
|
| Medida de Rosca |
|
Detalles
Compatibility & Interchange Data
- Thor Finger-Lock Interchange
- Interchanges with National A type, Campbell Double-Lock and Thor PHC series couplings
Construction
- Machined components are manufactured using solid bar stock.
- Nitrile (Nitrile Rubber) seals are standard
- Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve. 2-Piece Sleeve has a phosphor bronze spring.
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Safety Notes
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
Recursos
