Product Information
- Coupling is designed to minimize spillage and damage associated with drive away and pull away incidents.
- Typical applications: loading rack
MX | es
Imagen
SBC100SSFL - Acople de Seguridad MannTek “Break Away” - Versión Industrial Brida 150# x Brida 150#
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Peso |
5.7 lb
|
|---|---|
| Compra Minima |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Medida |
Used wherever a leak-proof swivel connection is needed in pipelines or in combination with hoses to eliminate hose twisting."
|
| Material |
Acero inoxidable 316
|
| Sello |
FKM (FPM)
|
| Ancho |
Top loading - fuel, bulk liquids mm
|
| Presión de Trabajo |
|
| Longitud |
Finish: 2 stage epoxy paint" (Configuration: Upfeed, right hand mm)
|
Detalles
Aplicaciones
Opciones disponibles
- Also available in NPT Thread, BSP thread, DN Flange, 300# ASA Flange, Grooved Ends or any combination thereof. Consult Dixon for more information.
- Optional Non-closure Design available, consult Dixon for more information. The non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents thus protecting piping systems and equipment. The design allows spillage of product in these instances due to the lack of valving in the coupling. Useful applications where non-hazardous product is being conveyed and where there are no environmental concerns.
Características
- Designed to be installed between a fixed point (pipe, pump, manifold) and a hose
- Coupling automatically senses an excessive load, closes the valves and disconnects
- High flow rate / low pressure drop
Como funciona
- The safety breakaway valve consists of two halves, each with a valve that has an O-ring seal. When the safety breakaway couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment.
- Los acoples de seguridad Breakaway tienen tres pernos de seguridad externos. En caso de tensión axial, todos los tornillos absorben la fuerza correspondiente a la fuerza de rotura de la manguera con un margen de seguridad. Las fuerzas no axiales concentran más las fuerzas de tracción en un perno, de modo que el acople de seguridad reacciona de forma natural a la reducción de las fuerzas de rotura de la manguera.
Recursos
Imagen
Product Information
Safety Breakaways Checklist
Product Information
2 in Industrial Breakaway Coupling Service Manual
Catalog Page
