Imagen
- Coupling is designed to minimize spillage and damage associated with drive away and pull away incidents.
- Typical applications: loading rack
MX | es
Imagen
SBC400ALA - Acople de Seguridad MannTek “Break Away” - Versión Industrial Hembra NPT x Hembra NPT
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Paquete Opcional/Cantidad por Caja |
1
|
|---|---|
| Medida |
4"
|
| Material |
Aluminio
|
| Sello |
FKM (FPM)
|
| Espesor |
8.3" (210 mm)
|
| Presión de Trabajo |
230 PSI at 70°F (21°C)
|
| Longitud |
12" (305 mm)
|
| Flujo |
800 GPM (3028 LPM)
|
Detalles
Applications
Available Options
- Also available in 150# Flange, BSP thread, DN Flange, 300# ASA Flange, Grooved Ends or any combination thereof. Consult Dixon for more information.
- Optional Non-closure Design is available. The non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents thus protecting piping systems and equipment. The design allows spillage of product in these instances due to the lack of valving in the coupling. Useful applications where non-hazardous product is being conveyed and where there are no environmental concerns. Available in both Industrial and Marine versions. Consult Dixon for more information.
Features
- Designed to be installed between a fixed point (pipe, pump, manifold) and a hose
- Coupling automatically senses an excessive load, closes the valves and disconnects
- High flow rate / low pressure drop
How It Works
- The safety break-away valve consists of two halves, each with a valve that has an O-ring seal. When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment.
- Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces.
