Imagen

SBC600SSA - Acople de Seguridad MannTek “Break Away” - Versión Industrial Hembra NPT x Hembra NPT

¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Atributos

Paquete Opcional/Cantidad por Caja
1
Medida
6"
Material
Acero inoxidable 316
Sello
FKM (FPM)
Espesor
12" (305 mm)
Presión de Trabajo
360 PSI at 70°F (21°C)
Longitud
16" (406 mm)
Flujo
1500 GPM (5678 LPM)

Detalles

Applications

  • Coupling is designed to minimize spillage and damage associated with drive away and pull away incidents.
  • Typical applications: loading rack

Available Options

  • Also available in 150# Flange, BSP thread, DN Flange, 300# ASA Flange, Grooved Ends or any combination thereof. Consult Dixon for more information.
  • Optional Non-closure Design is available. The non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents thus protecting piping systems and equipment. The design allows spillage of product in these instances due to the lack of valving in the coupling. Useful applications where non-hazardous product is being conveyed and where there are no environmental concerns. Available in both Industrial and Marine versions. Consult Dixon for more information.

Features

  • Designed to be installed between a fixed point (pipe, pump, manifold) and a hose
  • Coupling automatically senses an excessive load, closes the valves and disconnects
  • High flow rate / low pressure drop

How It Works

  • The safety break-away valve consists of two halves, each with a valve that has an O-ring seal. When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment.
  • Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces.