Imagen
Product Literature
When hose, couplings or clamps fail, or there is an accidental separation of the assembly, King safety cables minimize damage to equipment and injuries to operators.
MX | es
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Presión de Operación Máxima | |
|---|---|
| Peso |
2.45 lb
|
| Break Quantity |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Medida |
NEMA 4/4X enclosure mm
|
| Material |
Acero inoxidable 304
|
| Longitud |
H01" (1-1/2" MNPT x 1-3/8" mm)
|
| DI de Manguera |
Ball Bearings: Carbon Steel" (Other seal options: Nitrile rubber, EPR, and Neoprene mm)
|
Detalles
Application
Construction
- Wire Rope: 304 Stainless Steel
- Ferrules: Copper
- Springs: 304 Stainless Steel
Features
- King cable is the low cost answer to eliminate injuries caused by broken air hose connections
- King safety cable reaches across the hose fittings to provide standby safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose.
- Thoroughly tested with years of service. A positive safeguard for air hose connections - helps you meet today's safety standards.
- Highly resistant to rust and corrosion
Installation
- Must be installed in the extended position (no slack)
- No tools needed - easy to install and remove
Note
Cables are shipped with safety restraint labels attached
Safety Notes
- King Safety cable must be installed in the extended position (no slack)
- The Canada Occupational Safety and Health regulations Part XIII, 13:6b states: "Where an air hose is connected to a portable air powered tool used by an employee, a restraining device shall be attached to all hose connections, in order to prevent injury to an employee in the even of an accidental disconnection of a hose."
Recursos
