Catalog Page
- Chemical, pulp and paper, oil and gas refineries, military, air compressors and machine tools
- Well-suited for a variety of processing and general industry hydraulic applications
MX | es
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| DE de Tubo |
5/8"
|
|---|---|
| Peso |
0.018 lb
|
| Break Quantity |
0
|
| Paquete Opcional/Cantidad por Caja |
0
|
| Material |
Acero
|
Detalles
Applications
Features
- 3 piece design including only one ferrule eliminates possible make-up errors that may occur using a twin ferrule tube fitting.
- Minimal risk of improper assembly as the ferrule visibly bites into the tubing which allows installer to visually inspect the bite quality.
Installation
- Cut, de-burr and clean tubing
- Pre-set ferrule onto tubing
- Inspect ferrule bite in tubing by disassembling the fitting and visually inspecting the de-burred end of the tube for slight indentation.
- Finger tighten nut and then further wrench tighten nut another 1/3" to 1/2" turn.
Note
- Temperature rating is limited by the material chosen
- Pressure ratings are determined by the size (OD) and wall thickness (inches/mm) of the tubing on which they are to be installed
Specifications
Exceeds Military (MIL F18866) and SAE J514 standards
Use
- Ideally suited for use with tubing having medium to extra heavy wall thicknesses.
- Fittings are suitable for sub-zero through elevated temperature applications
