Product Information
- Use with copper, aluminum and thermoplastic tubing.
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
MX | es
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Peso |
0.06 lb
|
|---|---|
| Break Quantity |
0
|
| Paquete Opcional/Cantidad por Caja |
0
|
| Material |
Latón
|
| Rosca |
Recto
|
| Medida de Tubo |
1/4"
|
| Presión de Trabajo |
300 PSI
|
| Rango de Temperatura |
-65°F to 250°F (-54°C to 121°C)
|
| Medida de Rosca |
7/16"-24
|
Detalles
Applications
Installation
- No flaring, soldering or other preparation of tubing necessary to assemble
- Slide nut, then sleeve onto tubing. The thread end of the nut must face out.
- Insert tube into the fitting. Be sure the tube is bottomed on the fitting shoulder.
- Assemble nut to body, and tighten hand-tight. Then follow the number of appropriate wrench turns for the given size.
Note
- Temperature and type of tubing used are important factors in working pressure ranges. Pressure rating given at 73°F (23°C). For thermoplastic tubing, see manufacturers recommendation for pressure range.
- Temperature ranges are given for use with soft metal tubing. For thermoplastic tubing, see manufacturers recommendation for tubing temperature range.
Safety Notes
- Not recommended for steel tubing
- Not recommended for applications using gaseous media.
Specifications
- Underwriter's Laboratories listed for flammable liquid
- SAE J-512
- ASA
- Reference SAE 060201 BA
Recursos
Material Safety Data Sheet
Material Safety Data Sheet
Catalog Page
