Product Information
Designed for use in air brake systems or cab controls
MX | es
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Weight |
0.05 lb
|
|---|---|
| Break Quantity |
0
|
| Paquete Opcional/Cantidad por Caja |
0
|
| Material |
Latón
|
| Thread |
Recto
Tubería
|
| Tube Size |
5/8"
|
| Working Pressure |
150 PSI
|
| Temperature Range |
-40°F to 200°F (-40°C to 93°C)
|
| Thread Size |
13/16"-18
1/2"
|
| Flow |
.39"
|
Detalles
Applications
Construction
- Machined from CA260, CA345 or CA377 brass
- Pre-applied thread sealant
- Thread sealant may be white or burnt orange
Features
Positive grip
Installation
- Cut tubing squarely- maximum of 15° angle allowable.
- Check that port or mating part is clean and free of debris.
- Insert tubing into fittings until it bottoms on seat.
- Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench-tightened according to the tube size used.
Specifications
- Meets DOT FMVSS 571.106 and SAE J246
- Ref. SAE 100425 BA
Use
- Utilize ribbed sleeve for compression and positive grip
- Compatible tubing: SAE J844 type A and B
Recursos
Material Safety Data Sheet
Material Safety Data Sheet
Catalog Page
