Imagen
Imagen

5741212C - Conexiones para Manguera de Jardín Hembra Giratoria Lok-On

¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Atributos

Peso
0.135 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Latón
Material de Componentes
Tapa de plástico amarillo
Rosca
GHT
Rango de Temperatura
Grey epoxy painted°F to Auto-locking sleeve°F
Medida de Rosca
Longitud
DI de Manguera
Hex
Valor de Presión
150 PSI

Detalles

Features

Washer included, part # 5911212W

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Safety Notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

  • Number of Barbs: 3
  • Barb Length: 1.48"

Recursos