1/4" Industrial DF-Series Automatic Quick Coupler Set - Retail Packaged

Atributos

Peso	0.5916 lb
Break Quantity	6
Mandatory Package/Box Quantity	6
Material	Acople - Latón Tapón - Acero
DE Máximo
Rosca	NPTF
Tamaño de Cuerpo
Rango de Temperatura	6" grooved manifold with six 2" female NT ports, one 1" NPT port (left or right version)°F (Not pressure retaining, open flow only°C)
Medida de Rosca
Longitud
Hex	Acople y tapón hembra - 11/16"
Valor de Presión	See Product Details

Detalles

Compatibility & Interchange Data

Foster 3, 4, 5 and 6 Series
Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange
Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500

Construction

Machined components are manufactured using solid bar stock.
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
Nitrile (Nitrile Rubber) seals are standard
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Steel tubular valve

Description

(Se requieren 6 cajas por caja)

How It Works

To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Includes

2DF2-B, D2F2, D2M2 (3)

Safety Notes

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Specifications

Cople - Presión nominal para el acople de latón y el tapón de latón conectados: 300 PSI (20 bar) de máximo trabajo y 16 000 PSI (1100 bar) de reventón
Cople - Presión nominal para el acople de latón y el tapón de latón conectados: 500 PSI (35 bar) de máximo trabajo y 16000 PSI (1100 bar) de reventón
Niple hembra: presión nominal cuando se conecta con acoples manuales de latón serie-F: 500 PSI (35 bar) de trabajo máximo y 9000 PSI (620 bar) de reventón
Male Plug - Rated pressure when connected with Brass F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 11,500 PSI (790 bar) Burst
Enchufe Hembra/Macho - Valor de presión conectado a un Cople Automático Serie D de latón: 500 PSI (35 Bar) Máxima presión de trabajo y Reventón 16,000 PSI (1,100 bar)
Enchufe Hembra/Macho - Valor de presión conectado a un Cople Automático Serie F de acero: 500 PSI (35 Bar) Máxima presión de trabajo y Reventón 6500 PSI (448 bar)

Recursos