Imagen
hose fitting installation tool 272at

272AT - herramienta de inserción para Conexiones Push-On

¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Atributos

Peso
6.6 lb
Break Quantity
1
Paquete Opcional/Cantidad por Caja
1
Espesor
Longitud
Altura
Dixon's swivel joints are found in blending plants, drum filling applications, fluid and dry bulk transfer, vacuum trucks, oil and gas trucks and water trucks."

Detalles

Features

  • Cuts push-on style hose and inserts the fitting
  • Built-in cutter slices through 1/4" - 3/4" I.D. reinforced push-on hose without fraying
  • Tool has four 7/16" diameter mounting holes for bench mounting
  • A triple reinforce handle to ensure the handle will not bend during use
  • All component parts and the assembly are made in the USA 

Installation

  • To cut your hose, retract the handle, place the hose in the cutter area and pull the handle.
  • After cutting the hose to the desired length, place the hose under the cam handle locking it in place with the hose end aligned with the appropriate mark on the label.
  • Place the barbed end of the fitting against the end of the hose and then pull the handle forward to complete the installation.

Safety Notes

  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • Replacement parts are not available for this item.