Imagen
J-Series Automotive Pneumatic Standard Hose Barb Coupler
Imagen
j-s coupler 3d half

2JS3-B - Serie-J Cople Intercambio Truflate (Barbas para Manguera)

¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Atributos

Peso
0.19 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Latón
DE Máximo
0.88" (22.4 mm)
Tamaño de Cuerpo
1/4"
Rango de Temperatura
-40°F to 250°F (-40°C to 121°C)
Longitud
2.53" (64.3 mm)
DI de Manguera
3/8"
Hex
3/4"
Valor de Presión
See Product Details

Detalles

Compatibility & Interchange Data

  • Truflate Automotive Interchange
  • Parker 10 Series, Rectus 55KM and Tomco A2100/PT400

Construction

  • Machined components are manufactured using solid bar stock.
  • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
  • Nitrile (Nitrile Rubber) seals are standard
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Steel sleeve and steel tubular valve

Safety Notes

  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Specifications

  • Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 10,500 PSI (724 bar) Burst
  • Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 11,500 PSI (793 bar) Burst

Recursos