Imagen
J-Series Automotive Pneumatic Standard Hose Barb Plug
Imagen
j-s nipple 3d half

J3S2 - Serie-J Niple Intercambio Truflate (Barbas para Manguera)

¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Atributos

Weight
0.08 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Acero
Maximum OD
0.75" (19.1 mm)
Body Size
3/8"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Length
2.18" (55.4 mm)
Hose ID
1/4"
Pressure Rating
See Product Details

Detalles

Compatibility & Interchange Data

  • Truflate Automotive Interchange
  • Parker 10 Series, Rectus 55KM and Tomco A2100/PT400

Construction

Machined components are manufactured using solid bar stock.

Safety Notes

  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Specifications

Rated pressure for connected Steel Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 18,000 PSI (1,241 bar) Burst