Imagen
Learning Video
1/4"
MX | es
Imagen
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Peso |
0.18 lb
|
|---|---|
| Break Quantity |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Material |
Latón
|
| DE Máximo |
0.87"
|
| Tamaño de Cuerpo |
|
| Rango de Temperatura |
-40°F to 250°F (-40°C to 121°C)
|
| Longitud |
2.36"
|
| DI de Manguera |
1/4"
|
| Hex |
3/4"
|
| Valor de Presión |
Detalles
Compatibility & Interchange Data
- ARO 210
- Parker 50-Series and Amflo Type 'B'
Construction
- Machined components are manufactured using solid bar stock.
- Stainless steel springs. Carbon steel balls and retaining rings.
- Nitrile (Nitrile Rubber) seals are standard
Safety Notes
- Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
- Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
- It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
Specifications
- Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 12,700 PSI (876 bar) Burst
- Rated pressure for connected Brass Coupler & Steel Plug: 300 PSI (20 bar) Maximum Working and 12,400 PSI (855 bar) Burst
Recursos
Catalog Page
