Imagen
W-Series Wingstyle Hex-Nut Female Threaded Coupler
Imagen
w-f hex coupler 3d half

10WF10-B-HN - Serie-W Cople Rosca Hexagonal Unión de Rosca Intercambio Estilo Mariposa (Rosca Hembra)

¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Atributos

Presión de Operación Máxima
3,000 PSI (207 bar)
Peso
2.58 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Latón
DE Máximo
2.75" (69.9 mm)
Rosca
Hembra NPTF
Tamaño de Cuerpo
1-1/4"
Rango de Temperatura
-40°F to 250°F (-40°C to 121°C)
Presión de Reventón
12,000 PSI (828 bar)
Medida de Rosca
1-1/4" - 11-1/2
Longitud
3.64" (92.5 mm)
Hex
1-25/32"

Detalles

Applications

Designed for applications requiring a coupling that can be connected under residual pressure with minimum spillage and air inclusion. Widely used on dump trailer wet-line hydraulic systems and oil field equipment. Not recommended for continuous hydraulic impulse applications.

Compatibility & Interchange Data

  • Aeroquip 5100-Series, Parker 6100-Series
  • Snap-Tite 78-Series, Faster Series-FB, Safeway S51-Series

Construction

  • Machined components are manufactured using solid bar stock
  • Stainless steel retaining rings and springs maximize corrosion resistance and extend service life.
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Nitrile (Nitrile Rubber) seals are standard
  • Main coupler valve has a bonded face-seal to improve seal integrity during pressurized connection/disconnection.
  • Redundant O-Ring on the coupler body will engage nipple for secondary sealing support.

Safety Notes

  • Although wingstyle couplings are able to connect and disconnect while under pressure, it is recommended that hydraulic power supply be de-energized during connection to ensure operator safety. If it is not possible to de-energize the circuit, operators must be aware of their surroundings to ensure that an attachment or tool does not put them at risk, once hydraulic power is applied during the connection process.
  • W-series couplings are not recommended for continuous hydraulic impulse applications at rated pressures.