Material Safety Data Sheet
Ball seat type
MX | en
Image
Have a Question?
Call +8183545649 or click the Contact Us Button to send us an email.
Attributes
| Weight |
0.21 lb
|
|---|---|
| Break Quantity |
1
|
| Optional Package/Box Quantity |
1
|
| Material |
Brass
|
| Component Material |
Yellow Plastic Cap
|
| Female Thread |
NPSM
|
| Temperature Range |
-40°F to 150°F (-40°C to 65.6°C)
|
| Length |
2.36"
|
| Hose ID |
3/4"
|
| Hex |
1-3/16"
|
| Pressure Rating | |
| Female Thread Size |
3/4"-14
|
Details
Construction
Installation
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Instructions
- Disassembly instructions:
- 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Number of Barbs: 3
- Barb Length: 1.50"
Resources
Material Safety Data Sheet
Male NPT x Push-on Hose Barb
Image
Product Literature
Lok-On Hose Fittings with Garden Hose Threads- Data Sheet
Catalog Page
Catalog Page 344
Image
Learning Video
272AT - Push-On Fitting Insertion Tool
2D Drawing
