Image

2720808CBC - Male NPT x Push-on Hose Barb

Have a Question? 

Call +8183545649 or click the Contact Us Button to send us an email.

Attributes

Weight
0.119 lb
Break Quantity
1
Optional Package/Box Quantity
1
Material
Brass
Component Material
Brass Cap
Male Thread
NPTF
Temperature Range
-40°F to 150°F
Length
2.07"
Hose ID
1/2"
Hex
7/8"
Male Thread Size
1/2"-14
Pressure Rating
350 PSI

Details

Construction

Dryseal

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

No hose clamps or ferrules are needed

Safety Notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

  • Number of Barbs: 2
  • Barb Length: 1.02"

Resources

    Request a Quote

    Need help selecting the correct components?