Material Safety Data Sheet
Notch in nut for SAE identification
MX | es
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| DE de Tubo |
3/8"
|
|---|---|
| Peso |
0.072 lb
|
| Break Quantity |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Material |
Latón
|
| Material de Componentes |
Tapa de latón
|
| Rosca Hembra |
UNF
|
| Rango de Temperatura |
-40°F to 150°F (-40°C to 65.6°C)
|
| Longitud |
1.75"
|
| DI de Manguera |
3/8"
|
| Hex |
3/4"
|
| Valor de Presión | |
| Tamaño de Rosca Hembra |
5/8"-18
|
Detalles
Features
Installation
- Trim hose end with a smooth square cut.
- Lubricate either Lok-On fitting, hose or both.
- Insert Lok-on fitting into hose until first barb is in the hose.
- Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from the end. Push with a steady force until the end of the hose is covered by the yellow plastic cap.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Number of Barbs: 2
- Barb Length: .92"
Recursos
Material Safety Data Sheet
Imagen
Product Literature
Catalog Page
Imagen
Learning Video
