Catalog Page
1/4"
MX | es
Imagen
Imagen
¿Tienes una duda?
Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.
Atributos
| Presión de Operación Máxima | |
|---|---|
| Peso |
0.21 lb
|
| Break Quantity |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Material |
Aluminio
|
| DE Máximo |
1.12"
|
| Tamaño de Cuerpo |
|
| Rango de Temperatura |
-40°F to 250°F (-40°C to 121°C)
|
| Presión de Reventón |
6500 PSI (448 bar)
|
| Longitud |
2.67"
|
| DI de Manguera |
3/8"
|
| Hex |
11/16"
|
Detalles
Compatibility & Interchange Data
- Schrader Twist-Lock Interchange
- Parker Twist-Lock, Tomco Series-TL, Foster SHD
Construction
- Machined components are manufactured using solid bar stock.
- Stainless steel toggle-pawls and springs. Carbon steel retaining rings.
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
- Adapter components are constructed of brass.
- Sleeves are constructed of steel.
- Nitrile (Nitrile Rubber) seals standard
Safety Notes
- It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
- Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
- Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
