MX flag MX | es
MX flag MX | es
df series industrial nipple male threads
df-m 3D half

D3M3-S - Serie-DF Niple Intercambio Industrial (Rosca Macho)

Ver productos similares
¿Tienes una duda? 

Llámanos al +8183545649 o da clic en el botón de contacto para mandarnos un email.

Contáctenos

Atributos

Weight
0.09 lb
Break Quantity
1
Paquete Opcional/Cantidad por Caja
1
Material
Acero inoxidable 303
Maximum OD
0.87" (22.1 mm)
Thread
NPTF
Body Size
3/8"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Thread Size
3/8"
Length
1.87" (47.5 mm)
Hex
3/4"
Pressure Rating
See Product Details

Detalles

Compatibility & Interchange Data

  • Foster 3, 4, 5 and 6 Series
  • Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange
  • Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500

Construction

Machined components are manufactured using solid bar stock.

How It Works

  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Specifications

  • Rated pressure when connected with 303 Stainless Steel D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 25,500 PSI (1,760 bar) Burst
  • Rated pressure when connected with 303 Stainless Steel F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 20,500 PSI (1,415 bar) Burst

Recursos